使用Radius协议，下发带宽和突发流量控制(页 1) - 程序设计(Programming ) - + 湖南.大学生科技创新平台湖南工业大学学生技术平台主办 .NET 应用,计算机网络,系统集成 innlab.net

maozilee 发表于 2008-8-3 17:22

使用Radius协议，下发带宽和突发流量控制

使用FreeRadius 支持任何NAS BAS接入设备进行带宽流量的下发： VYJ/m5sBS Pv
.sQNk ?@'C
原创申明：转载请注明：湖南工业大学学生技术平台 +JmU5xOgv;H
II }CVL
关于radius协议应用于的burst突发控制属性，搞定了！结贴%]9khzs
[size=4][/size]eD-F`o^
[size=4]这是我在hnebony 的BBS发表的贴：[/size]
[size=4][/size]
[size=4]以下示例仅用于ROS，可以推广到其他设备中，如联想VPN防火墙。[/size]V(D5]e'Vvl4U-X
[size=4]da(D g#x5xxl
RouterOS-Rate-Limit 可用于复杂的速率限制。

字符串表示，格式为 rx-rate[/tx-rate] [rx-burst-rate[/tx-burst-rate] [rx-burst-threshold[/tx-burst-threshold] [rx-burst-time[/tx-burst-time] [priority] [rx-rate-min[/tx-rate-min]
9SQ+\1`)eG^
其中，[ ]括号中内容表示可选。"rx" 表示客户的上传速率，"tx"客户的下载速率。)Dz#EG+?#s }f9]l,n
nJgrz&tyTY
burst-rate突发速率，burst-threshold突发门限，burst-time突发时长。
[/size] jDb|s#j!Y U;P
[size=4][/size] 4y cwU.l:tJW"i&p-m7L;@
[size=4]示例：2000k/2000k 3000k/3000k 2000k/2000k 10[/size]
[size=4][/size] mMP)Ke,S
[size=4]下载&上传 2M，突发下载&上传控制为3M，，从2M起开始突发控制突发控制时间为10秒

他们设计了一套ROS认证管理系统，就是写了些存储过程啊，ASP啊，，没涉及到底层协议上！！这些数据同样可以通过他们的数据库中的 rate_limit 字段中发现！不过我个人认为这系统的数据基础构架设计的不完善，仅能使用百来人的小区！
而且使用的是 SQLServer2000 、SBR ，你们知道多么贵吗？这2个软件都快10来万了？
在那边的论坛稿件如下：[url=http://bbs.hnebony.com/read.php?tid=803][color=#262626]http://bbs.hnebony.com/read.php?tid=803[/color][/url]k/WG#kU,]1bbS
~7P*DBF2z"^'QW
真正搞开源 Freeradius是个很好的选择！从浅入深的学才是真！ rS4fw]I?
3}N&wf&^ ?/eW
FreeRadius+Linux+MySQL ===== FREE！

A3v"lrP#e|7N0m
拿砖头砸我？？？不必了，该做的我们都做好了：
$PO)MJ!~'aao%M*o R
[url=http://www.hut.edu.cn:82/riseradius/]http://www.hut.edu.cn:82/riseradius/[/url] 嘿嘿，该版本不是最新的哦！！
7TgF'hY|k

[/size]

maozilee 发表于 2008-8-3 17:32

RouterOS Radius属性官方解释

Mikrotik-Recv-Limit  从客户端收到报文总字节数限制,可以用于基于流量记费.h+~\g~[.p-x^-~'oI
Mikrotik-Xmit-Limit  发给客户端收到报文总字节数限制,可以用于基于流量记费.T0ElO m B._
Mikrotik-Group 用户组,在使用radius认证Mikrotik管理用户时可以用该属性返回用户属于full组还是其他组. w!@@"R#z`
Mikrotik-Wireless-Forward  转发项,当radius将该属性值=0返回给Mikrotik时,Mikrotik无线客户端的帧不转发到infrastructure `p.Q9gQ*t&w
Mikrotik-Wireless-Skip-Dot1x  802.1x认证选项,radius将不等于0的该属性值返回给Mikrotik时,Mikrotik对该无线客户忽略802.1x认证.7s ^7B8I6t9D7a
Mikrotik-Wireless-Enc-Algo WEP加密算法。0 表示不加密, 1 表示40-bit WEP, 2 表示104-bit WEP (Wireless only) bV2Iq%\)J3k,@ C
Mikrotik-Wireless-Enc-Key WEP 加密 key
Mikrotik-Rate-Limit  客户的速率限制。字符串表示，格式为 rx-rate[/tx-rate] [rx-burst-rate[/tx-burst-rate] [rx-burst-threshold[/tx-burst-threshold] [rx-burst-time[/tx-burst-time] [priority] [rx-rate-min[/tx-rate-min]]]]
其中，[]中内容表示可选。"rx" 表示客户的上传速率，"tx"客户的下载速率。burst-rate突发速率，burst-threshold突发门限，burst-time突发时长。~6|ja1X_8^}
Mikrotik-Realm  帐号域名后缀。
Mikrotik-Host-IP HOTSPOT客户端最初始的IP地址
Mikrotik-Mark-Id  防火墙magle链名。只用于HOTSPOT。 ?}4n0Mx)xCC
Mikrotik-Advertise-URL 通知页面地址（URL）。一般用于HOTSPOTb Pi$SjL~
Mikrotik-Advertise-Interval URL通告时间间隔*O3P2CIw^-a!N ]
Mikrotik-Ascend-Client-Gateway HOTSPOT应用中，DHCP地址池中客户端的网关地址。   VOBT(k!O'IUz(n
Mikrotik-Ascend-Data-Rate 类似与rate-limit但该属性被rate-limit忽略
Mikrotik-Ascend-Xmit-Rate  下载速率限制但该属性被rate-limit忽略

maozilee 发表于 2008-8-3 17:33

官方原版--呵呵，要英语基础了！

Supported RADIUS AttributesDescription[b][u]MikroTik RADIUS Dictionaries[/u][/b] Here you can download [url=http://www.mikrotik.com/Documentation/manual_2.9/dictionary][color=#0000ff]MikroTik reference dictionary[/color][/url], which incorporates all the needed RADIUS attributes. This dictionary is the minimal dictionary, which is enough to support all features of MikroTik RouterOS. It is designed for FreeRADIUS, but may also be used with many other UNIX RADIUS servers (eg. XTRadius).
Note that it may conflict with the default configuration files of RADIUS server, which have references to the Attributes, absent in this dictionary. Please correct the configuration files, not the dictionary, as no other Attributes are supported by MikroTik RouterOS.&Le9i&X KO2^o
There is also [url=http://www.mikrotik.com/Documentation/manual_2.9/dictionary.mikrotik][color=#0000ff]dictionary.mikrotik[/color][/url] that can be included in an existing dictionary to support MikroTik vendor-specific Attributes."zV_ D:uF0f
[b][u]Definitions[/u][/b] [list][*][b]PPPs[/b] - PPP, PPTP, PPPoE and ISDN[*][b]default configuration[/b] - settings in default profile (for PPPs) or HotSpot server settings (for HotSpot)[/list]'_;~)no,[{v"lcD
[b][u]Access-Request[/u][/b] [list][*][b]Service-Type[/b] - always is "Framed" (only for PPPs)[*][b]Framed-Protocol[/b] - always is "PPP" (only for PPPs)[*][b]NAS-Identifier[/b] - router identity[*][b]NAS-IP-Address[/b] - IP address of the router itself[*][b]NAS-Port[/b] - unique session ID[*][b]Acct-Session-Id[/b] - unique session ID[*][b]NAS-Port-Type[/b] - async PPP - "Async"; PPTP and L2TP - "Virtual"; PPPoE - "Ethernet"; ISDN - "ISDN Sync"; HotSpot - "Ethernet | Cable | Wireless-802.11" (according to the value of [b]nas-port-type[/b] parameter in [b]/ip hotspot profile[/b][*][b]Calling-Station-Id[/b] - PPPoE and HotSpot- client MAC address in capital letters; PPTP and L2TP - client public IP address; ISDN - client MSN[*][b]Called-Station-Id[/b] - PPPoE - service name; PPTP and L2TP - server IP address; ISDN - interface MSN; HotSpot - name of the HotSpot server[*][b]NAS-Port-Id[/b] - async PPP - serial port name; PPPoE - ethernet interface name on which server is running; HotSpot - name of the physical HotSpot interface (if bridged, the bridge port name is showed here); not present for ISDN, PPTP and L2TP[*][b]Framed-IP-Address[/b] - IP address of HotSpot client after Universal Client translation[*][b]Mikrotik-Host-IP[/b] - IP address of HotSpot client before Universal Client translation (the original IP address of the client)[*][b]User-Name[/b] - client login name[*][b]MS-CHAP-Domain[/b] - User domain, if present[*][b]Mikrotik-Realm[/b] - If it is set in [b]/radius[/b] menu, it is included in every RADIUS request as [b]Mikrotik-Realm[/b] attribute. If it is not set, the same value is sent as in [b]MS-CHAP-Domain[/b] attribute (if [b]MS-CHAP-Domain[/b] is missing, [b]Realm[/b] is not included neither)[*][b]WISPr-Location-ID[/b] - text string specified in [b]radius-location-id[/b] property of the HotSpot server[*][b]WISPr-Location-Name[/b] - text string specified in [b]radius-location-name[/b] property of the HotSpot server[*][b]WISPr-Logoff-URL[/b] - full link to the login page (for example, [url]http://10.48.0.1/lv/logout[/url])[/list],_k!rCZ zMR
Depending on authentication methods (NOTE: HotSpot uses CHAP by default and may use also PAP if unencrypted passwords are enabled, it can not use MSCHAP):
[list][*][b]User-Password[/b] - encrypted password (used with PAP authentication)[*][b]CHAP-Password, CHAP-Challenge[/b] - encrypted password and challenge (used with CHAP authentication)[*][b]MS-CHAP-Response, MS-CHAP-Challenge[/b] - encrypted password and challenge (used with MS-CHAPv1 authentication)[*][b]MS-CHAP2-Response, MS-CHAP-Challenge[/b] - encrypted password and challenge (used with MS-CHAPv2 authentication)[/list] sL3a"Xp RX5I
[b][u]Access-Accept[/u][/b] [list][*][b]Framed-IP-Address[/b] - IP address given to client. If address belongs to 127.0.0.0/8 or 224.0.0.0/3 networks, IP pool is used from the default profile to allocate client IP address. If Framed-IP-Address is specified, Framed-Pool is ignored[*][b]Framed-IP-Netmask[/b] - client netmask. PPPs - if specified, a route will be created to the network Framed-IP-Address belongs to via the Framed-IP-Address gateway; HotSpot - ignored by HotSpot[*][b]Framed-Pool[/b] - IP pool name (on the router) from which to get IP address for the client. If Framed-IP-Address is specified, this attribute is ignored[/list]!r#q5{NS
NOTE: if Framed-IP-Address or Framed-Pool is specified it overrides remote-address in default configuration
[list][*][b]Idle-Timeout[/b] - overrides idle-timeout in the default configuration[*][b]Session-Timeout[/b] - overrides session-timeout in the default configuration[*][b]Port-Limit[/b] - maximal mumber of simultaneous connections using the same username (overrides te [b]shared-users[/b] property of the HotSpot user profile)[*][b]Class[/b] - cookie, will be included in Accounting-Request unchanged[*][b]Framed-Route[/b] - routes to add on the server. Format is specified in RFC2865 (Ch. 5.22), can be specified as many times as needed[*][b]Filter-Id[/b] - firewall filter chain name. It is used to make a dynamic firewall rule. Firewall chain name can have suffix .in or .out, that will install rule only for incoming or outgoing traffic. Multiple Filter-id can be provided, but only last ones for incoming and outgoing is used. For PPPs - filter rules in [b]ppp[/b] chain that will jump to the specified chain, if a packet has come to/from the client (that means that you should first create a [b]ppp[/b] chain and make [b]jump[/b] rules that would put actual traffic to this chain). The same applies for HotSpot, but the rules will be created in [b]hotspot[/b] chain[*][b]Mikrotik-Mark-Id[/b] - firewall mangle chain name (HotSpot only). The MikroTik RADIUS client upon receiving this attribute creates a dynamic firewall mangle rule with [b]action=jump chain=hotspot[/b] and [b]jump-target[/b] equal to the atribute value. Mangle chain name can have suffixes .in or .out, that will install rule only for incoming or outgoing traffic. Multiple Mark-id attributes can be provided, but only last ones for incoming and outgoing is used.[*][b]Acct-Interim-Interval[/b] - interim-update for RADIUS client. PPP - if 0 uses the one specified in RADIUS client; HotSpot - only respected if [b]radius-interim-update=received[/b] in HotSpot server profile[*][b]MS-MPPE-Encryption-Policy[/b] - require-encryption property (PPPs only)[*][b]MS-MPPE-Encryption-Types[/b] - use-encryption property, non-zero value means to use encryption (PPPs only)[*][b]Ascend-Data-Rate[/b] - tx/rx data rate limitation if multiple attributes are provided, first limits tx data rate, second - rx data rate. If used together with [b]Ascend-Xmit-Rate[/b], specifies rx rate. 0 if unlimited. Ignored if [b]Rate-Limit[/b] attribute is present[*][b]Ascend-Xmit-Rate[/b] - tx data rate limitation. It may be used to specify tx limit only instead of sending two sequental [b]Ascend-Data-Rate[/b] attributes (in that case [b]Ascend-Data-Rate[/b] will specify the receive rate). 0 if unlimited. Ignored if [b]Rate-Limit[/b] attribute is present[*][b]MS-CHAP2-Success[/b] - auth. response if MS-CHAPv2 was used (for PPPs only)[*][b]MS-MPPE-Send-Key, MS-MPPE-Recv-Key[/b] - encryption keys for encrypted PPPs provided by RADIUS server only is MS-CHAPv2 was used as authentication (for PPPs only)[*][b]Ascend-Client-Gateway[/b] - client gateway for DHCP-pool HotSpot login method (HotSpot only)[*][b]Mikrotik-Recv-Limit[/b] - total receive limit in bytes for the client[*][b]Mikrotik-Recv-Limit-Gigawords[/b] - 4G (2^32) bytes of total receive limit (bits 32..63, when bits 0..31 are delivered in [b]Mikrotik-Recv-Limit[/b])[*][b]Mikrotik-Xmit-Limit[/b] - total transmit limit in bytes for the client[*][b]Mikrotik-Xmit-Limit-Gigawords[/b] - 4G (2^32) bytes of total transmit limit (bits 32..63, when bits 0..31 are delivered in [b]Mikrotik-Recv-Limit[/b])[*][b]Mikrotik-Wireless-Forward[/b] - not forward the client's frames back to the wireless infrastructure if this attribute is set to "0" (Wireless only)[*][b]Mikrotik-Wireless-Skip-Dot1x[/b] - disable 802.1x authentication for the particulat wireless client if set to non-zero value (Wireless only)[*][b]Mikrotik-Wireless-Enc-Algo[/b] - WEP encryption algorithm: 0 - no encryption, 1 - 40-bit WEP, 2 - 104-bit WEP (Wireless only)[*][b]Mikrotik-Wireless-Enc-Key[/b] - WEP encruption key for the client (Wireless only)[*][b]Mikrotik-Rate-Limit[/b] - Datarate limitation for clients. Format is: [b]rx-rate[/tx-rate] [rx-burst-rate[/tx-burst-rate] [rx-burst-threshold[/tx-burst-threshold] [rx-burst-time[/tx-burst-time] [priority] [rx-rate-min[/tx-rate-min]]]][/b] from the point of view of the router (so "rx" is client upload, and "tx" is client download). All rates should be numbers with optional 'k' (1,000s) or 'M' (1,000,000s). If tx-rate is not specified, rx-rate is as tx-rate too. Same goes for tx-burst-rate and tx-burst-threshold and tx-burst-time. If both rx-burst-threshold and tx-burst-threshold are not specified (but burst-rate is specified), rx-rate and tx-rate is used as burst thresholds. If both rx-burst-time and tx-burst-time are not specified, 1s is used as default. Priority takes values 1..8, where 1 implies the highest priority, but 8 - the lowest. If rx-rate-min and tx-rate-min are not specified rx-rate and tx-rate values are used. The rx-rate-min and tx-rate-min values can not exceed rx-rate and tx-rate values.[*][b]Mikrotik-Group[/b] - Router local user group name (defines in [b]/user group[/b]) for local users. HotSpot default profile for HotSpot users.[*][b]Mikrotik-Advertise-URL[/b] - URL of the page with advertisements that should be displayed to clients. If this attribute is specified, advertisements are enabled automatically, including transparent proxy, even if they were explicitly disabled in the corresponding user profile. Multiple attribute instances may be send by RADIUS server to specify additional URLs which are choosen in round robin fashion.[*][b]Mikrotik-Advertise-Interval[/b] - Time interval between two adjacent advertisements. Multiple attribute instances may be send by RADIUS server to specify additional intervals. All interval values are threated as a list and are taken one-by-one for each successful advertisement. If end of list is reached, the last value is continued to be used.[*][b]WISPr-Redirection-URL[/b] - URL, which the clients will be redirected to after successfull login[*][b]WISPr-Bandwidth-Min-Up[/b] - minimal datarate (CIR) provided for the client upload[*][b]WISPr-Bandwidth-Min-Down[/b] - minimal datarate (CIR) provided for the client download[*][b]WISPr-Bandwidth-Max-Up[/b] - maxmal datarate (MIR) provided for the client upload[*][b]WISPr-Bandwidth-Max-Down[/b] - maxmal datarate (MIR) provided for the client download[*][b]WISPr-Session-Terminate-Time[/b] - time, when the user should be disconnected; in "YYYY-MM-DDThh:mm:ssTZD" form, where Y - year; M - month; D - day; T - separator symbol (must be written between date and time); h - hour (in 24 hour format); m - minute; s - second; TZD - time zone in one of these forms: "+hh:mm", "+hhmm", "-hh:mm", "-hhmm"[/list]
Note that the received attributes override the default ones (set in the default profile), but if an attribute is not received from RADIUS server, the default one is to be used."{B#kck7aB
Rate-Limit takes precedence over all other ways to specify data rate for the client. Ascend data rate attributes are considered second; and WISPr attributes takes the last precedence.
Here are some Rate-Limit examples:,y St x JEm
[list][*][b]128k[/b] - rx-rate=128000, tx-rate=128000 (no bursts)[*][b]64k/128M[/b] - rx-rate=64000, tx-rate=128000000[*][b]64k 256k[/b] - rx/tx-rate=64000, rx/tx-burst-rate=256000, rx/tx-burst-threshold=64000, rx/tx-burst-time=1s[*][b]64k/64k 256k/256k 128k/128k 10/10[/b] - rx/tx-rate=64000, rx/tx-burst-rate=256000, rx/tx-burst-threshold=128000, rx/tx-burst-time=10s[/list]
[b][u]Accounting-Request[/u][/b] The accounting request carries the same attributes as Access Request, plus these ones:D0w,^p5Ty?
[list][*][b]Acct-Status-Type[/b] - Start, Stop, or Interim-Update[*][b]Acct-Authentic[/b] - either authenticated by the RADIUS or Local authority (PPPs only)[*][b]Class[/b] - RADIUS server cookie, as received in Access-Accept[*][b]Acct-Delay-Time[/b] - how long does the router try to send this Accounting-Request packet[/list]
[b][u]Stop and Interim-Update Accounting-Request[/u][/b] Additionally to the accounting start request, the following messages will contain the following attributes:
[list][*][b]Acct-Session-Time[/b] - connection uptime in seconds[*][b]Acct-Input-Octets[/b] - bytes received from the client[*][b]Acct-Input-Gigawords[/b] - 4G (2^32) bytes received from the client (bits 32..63, when bits 0..31 are delivered in [b]Acct-Input-Octets[/b])[*][b]Acct-Input-Packets[/b] - nubmer of packets received from the client[*][b]Acct-Output-Octets[/b] - bytes sent to the client[*][b]Acct-Output-Gigawords[/b] - 4G (2^32) bytes sent to the client (bits 32..63, when bits 0..31 are delivered in [b]Acct-Output-Octets[/b])[*][b]Acct-Output-Packets[/b] - number of packets sent to the client[/list]vyUm}"B^1V
[b][u]Stop Accounting-Request[/u][/b] These packets will, additionally to the Interim Update packets, have:~E&?-tw8a!e
[list][*][b]Acct-Terminate-Cause[/b] - session termination cause (see RFC2866 ch. 5.10)[/list]
[b][u]Change of Authorization[/u][/b] RADIUS disconnect and Change of Authorization (according to RFC3576) are supported as well. These attributes may be changed by a CoA request from the RADIUS server:
[list][*]Mikrotik-Group[*]Mikrotik-Recv-Limit[*]Mikrotik-Xmit-Limit[*]Mikrotik-Rate-Limit[*]Ascend-Data-Rate (only if [b]Mikrotik-Rate-Limit[/b] is not present)[*]Ascend-XMit-Rate (only if [b]Mikrotik-Rate-Limit[/b] is not present)[*]Mikrotik-Mark-Id[*]Filter-Id[*]Mikrotik-Advertise-Url[*]Mikrotik-Advertise-Interval[*]Session-Timeout[*]Idle-Timeout[*]Port-Limit[/list]8yCZy w9Ci\
Note that it is not possible to change IP address, pool or routes that way - for such changes a user must be disconnected first.
[b][u]Attribute Numeric Values[/u][/b] [table][tr][td]Name[/td][td]VendorID[/td][td]Value[/td][td]RFC where it is defined[/td][/tr][tr][td]Acct-Authentic[/td][td][/td][td]45[/td][td]RFC2866[/td][/tr][tr][td]Acct-Delay-Time[/td][td][/td][td]41[/td][td]RFC2866[/td][/tr][tr][td]Acct-Input-Gigawords[/td][td][/td][td]52[/td][td]RFC2869[/td][/tr][tr][td]Acct-Input-Octets[/td][td][/td][td]42[/td][td]RFC2866[/td][/tr][tr][td]Acct-Input-Packets[/td][td][/td][td]47[/td][td]RFC2866[/td][/tr][tr][td]Acct-Interim-Interval[/td][td][/td][td]85[/td][td]RFC2869[/td][/tr][tr][td]Acct-Output-Gigawords[/td][td][/td][td]53[/td][td]RFC2869[/td][/tr][tr][td]Acct-Output-Octets[/td][td][/td][td]43[/td][td]RFC2866[/td][/tr][tr][td]Acct-Output-Packets[/td][td][/td][td]48[/td][td]RFC2866[/td][/tr][tr][td]Acct-Session-Id[/td][td][/td][td]44[/td][td]RFC2866[/td][/tr][tr][td]Acct-Session-Time[/td][td][/td][td]46[/td][td]RFC2866[/td][/tr][tr][td]Acct-Status-Type[/td][td][/td][td]40[/td][td]RFC2866[/td][/tr][tr][td]Acct-Terminate-Cause[/td][td][/td][td]49[/td][td]RFC2866[/td][/tr][tr][td]Ascend-Client-Gateway[/td][td]529[/td][td]132[/td][td][/td][/tr][tr][td]Ascend-Data-Rate[/td][td]529[/td][td]197[/td][td][/td][/tr][tr][td]Ascend-Xmit-Rate[/td][td]529[/td][td]255[/td][td][/td][/tr][tr][td]Called-Station-Id[/td][td][/td][td]30[/td][td]RFC2865[/td][/tr][tr][td]Calling-Station-Id[/td][td][/td][td]31[/td][td]RFC2865[/td][/tr][tr][td]CHAP-Challenge[/td][td][/td][td]60[/td][td]RFC2866[/td][/tr][tr][td]CHAP-Password[/td][td][/td][td]3[/td][td]RFC2865[/td][/tr][tr][td]Class[/td][td][/td][td]25[/td][td]RFC2865[/td][/tr][tr][td]Filter-Id[/td][td][/td][td]11[/td][td]RFC2865[/td][/tr][tr][td]Framed-IP-Address[/td][td][/td][td]8[/td][td]RFC2865[/td][/tr][tr][td]Framed-IP-Netmask[/td][td][/td][td]9[/td][td]RFC2865[/td][/tr][tr][td]Framed-Pool[/td][td][/td][td]88[/td][td]RFC2869[/td][/tr][tr][td]Framed-Protocol[/td][td][/td][td]7[/td][td]RFC2865[/td][/tr][tr][td]Framed-Route[/td][td][/td][td]22[/td][td]RFC2865[/td][/tr][tr][td]Idle-Timeout[/td][td][/td][td]28[/td][td]RFC2865[/td][/tr][tr][td]Mikrotik-Advertise-Interval[/td][td]14988[/td][td]13[/td][td][/td][/tr][tr][td]Mikrotik-Advertise-URL[/td][td]14988[/td][td]12[/td][td][/td][/tr][tr][td]Mikrotik-Group[/td][td]14988[/td][td]3[/td][td][/td][/tr][tr][td]Mikrotik-Host-IP[/td][td]14988[/td][td]10[/td][td][/td][/tr][tr][td]Mikrotik-Mark-Id[/td][td]14988[/td][td]11[/td][td][/td][/tr][tr][td]Mikrotik-Rate-Limit[/td][td]14988[/td][td]8[/td][td][/td][/tr][tr][td]Mikrotik-Realm[/td][td]14988[/td][td]9[/td][td][/td][/tr][tr][td]Mikrotik-Recv-Limit[/td][td]14988[/td][td]1[/td][td][/td][/tr][tr][td]Mikrotik-Recv-Limit-Gigawords[/td][td]14988[/td][td]14[/td][td][/td][/tr][tr][td]Mikrotik-Wireless-Enc-Algo[/td][td]14988[/td][td]6[/td][td][/td][/tr][tr][td]Mikrotik-Wireless-Enc-Key[/td][td]14988[/td][td]7[/td][td][/td][/tr][tr][td]Mikrotik-Wireless-Forward[/td][td]14988[/td][td]4[/td][td][/td][/tr][tr][td]Mikrotik-Wireless-Skip-Dot1x[/td][td]14988[/td][td]5[/td][td][/td][/tr][tr][td]Mikrotik-Xmit-Limit[/td][td]14988[/td][td]2[/td][td][/td][/tr][tr][td]Mikrotik-Xmit-Limit-Gigawords[/td][td]14988[/td][td]15[/td][td][/td][/tr][tr][td]MS-CHAP-Challenge[/td][td]311[/td][td]11[/td][td]RFC2548[/td][/tr][tr][td]MS-CHAP-Domain[/td][td]311[/td][td]10[/td][td]RFC2548[/td][/tr][tr][td]MS-CHAP-Response[/td][td]311[/td][td]1[/td][td]RFC2548[/td][/tr][tr][td]MS-CHAP2-Response[/td][td]311[/td][td]25[/td][td]RFC2548[/td][/tr][tr][td]MS-CHAP2-Success[/td][td]311[/td][td]26[/td][td]RFC2548[/td][/tr][tr][td]MS-MPPE-Encryption-Policy[/td][td]311[/td][td]7[/td][td]RFC2548[/td][/tr][tr][td]MS-MPPE-Encryption-Types[/td][td]311[/td][td]8[/td][td]RFC2548[/td][/tr][tr][td]MS-MPPE-Recv-Key[/td][td]311[/td][td]17[/td][td]RFC2548[/td][/tr][tr][td]MS-MPPE-Send-Key[/td][td]311[/td][td]16[/td][td]RFC2548[/td][/tr][tr][td]NAS-Identifier[/td][td][/td][td]32[/td][td]RFC2865[/td][/tr][tr][td]NAS-Port[/td][td][/td][td]5[/td][td]RFC2865[/td][/tr][tr][td]NAS-IP-Address[/td][td][/td][td]4[/td][td]RFC2865[/td][/tr][tr][td]NAS-Port-Id[/td][td][/td][td]87[/td][td]RFC2869[/td][/tr][tr][td]NAS-Port-Type[/td][td][/td][td]61[/td][td]RFC2865[/td][/tr][tr][td]Port-Limit[/td][td][/td][td]62[/td][td]RFC2865[/td][/tr][tr][td]Service-Type[/td][td][/td][td]6[/td][td]RFC2865[/td][/tr][tr][td]Session-Timeout[/td][td][/td][td]27[/td][td]RFC2865[/td][/tr][tr][td]User-Name[/td][td][/td][td]1[/td][td]RFC2865[/td][/tr][tr][td]User-Password[/td][td][/td][td]2[/td][td]RFC2865[/td][/tr][tr][td]WISPr-Bandwidth-Max-Down[/td][td]14122[/td][td]8[/td][td]wi-fi.org[/td][/tr][tr][td]WISPr-Bandwidth-Max-Up[/td][td]14122[/td][td]7[/td][td]wi-fi.org[/td][/tr][tr][td]WISPr-Bandwidth-Min-Down[/td][td]14122[/td][td]6[/td][td]wi-fi.org[/td][/tr][tr][td]WISPr-Bandwidth-Min-Up[/td][td]14122[/td][td]5[/td][td]wi-fi.org[/td][/tr][tr][td]WISPr-Location-Id[/td][td]14122[/td][td]1[/td][td]wi-fi.org[/td][/tr][tr][td]WISPr-Location-Name[/td][td]14122[/td][td]2[/td][td]wi-fi.org[/td][/tr][tr][td]WISPr-Logoff-URL[/td][td]14122[/td][td]3[/td][td]wi-fi.org[/td][/tr][tr][td]WISPr-Redirection-URL[/td][td]14122[/td][td]4[/td][td]wi-fi.org[/td][/tr][tr][td]WISPr-Session-Terminate-Time[/td][td]14122[/td][td]9[/td][td]wi-fi.org[/td][/tr][/table]

页: [1]

+ 湖南.大学生科技创新平台's Archiver